Home->Products->MSB->IO363S

IO363S

Ethernet Module; 200MB/sec Digital Bus <--> NetSilicon Net40 solution; 150MHz 'C6711 DSP; Spartan-II S200 FPGA

Overview

The IO363S is a 'Stand-alone' Module that combines a TMS320C6711 DSP, a Xilinx FPGA and a NetSilicon ARM-chip with integrated MAC controller for connection to an Ethernet network. Typical applications for this Module are low-cost, high-performance Radar systems, where the FPGA will do the I/O interfacing from/to the RF section; the DSP doing the FFT processing and the ARM-Core doing the data-manipulation and the control of the Ethernet/Internet connections

Key Features:

	Single width module
	NET-50 Ethernet Solution
	16Mbytes SDRAM for the ARM Net50 processor
	150MHz TMS320C6711 DSP
	16 Mbytes SDRAM for the DSP.
	8 Mbyte Flash
	Dual-port Memory between the processors
	Xilinx Spartan-II XC200S FPGA.
	Two 200MB/sec Digital Bus Interfaces
	Four Comm-Ports
	TIM Global Connector
	TIM Standard compatible
	12 months warranty

Benefits

	The IO363s is the first of it's kind. A Module which provides a unique path for connecting high-speed DSPs to the Internet for applications like Radar applications, Spectrum Analysers, Digital Radio and similar Telecom systems.
	The IO363s is supported by either NetSilicon Linux or the NetOS to program the ARM sections of the Net-50 processor. The DSP is controlled by either Code Composer Studio or 3L Diamond RTOS.

Layout for the IO363S (PDF):

CLICK for Block Diagram (PDF):

User Manual (PDF)

Send questions and comments to webmaster.