Home->Products->MSB->FPG398-2000-4-Z2

FPG398-2000-4-Z2

FPGA Module, Virtex XC2V2000-4; 2MB ZBT SRAM; 4x 400MB/sec Digital Bus interface

Overview

The latest versions of the Xilinx Virtex-II are being used to the fullest of their potentials and offers the benefit of ZBT-RAM with no less than four 400MB/sec Digital Buses for general purpose I/O and interface to high-speed DAQ/DSP Modules, five interModule ComPorts and an enhanced 32-bit Global Bus interface to a Carrier.

Key Features:

	Single width module
	Virtex II^tm range of FPGA devices as user programmable resource.
	2M Gates equivalent or more of software configurable resource.XC2V2000-4, FF896 package.
	2 Banks of high speed ZBT SRAM 2 MBytes
	6 ComPorts or DL Interface (Datapipe Links @ 100Mbytes/sec.), 60 I/O pins
	32-bit Global Connector for Host-PC transfers, 78 I/O pins
	Four 400MB/sec Digital Bus Interfaces, 100 I/O pins
	4 Status LEDs
	External clock
	LVDS Interface and memory expansion options
	JTAG Diagnostics Port
	TIM Standard compatible
	12 months warranty

Benefits

	Simple prototyping for hardware solutions to typical DSP algorithms
	Scaleable and flexible system configuration
	Higher performance than conventional DSPs
	Expansion of memory or I/O interfaces using mezzanine cards
	VHDL Source to module interfaces available as 'Shareware'.
	The 400MB/sec Digital Bus Interfaces provides 25 I/O pins each and they are available to the user as general purpose I/O pins and uses the high-speed connector system from Samtec and use the 'Blue Ribbon' cables from Precision Interconnect.

Layout for the FPG398-2000-4-Z2 (PDF):

CLICK for Block Diagram (PDF):

User Manual (PDF)

Send questions and comments to webmaster.