Home->Products->MSB->DSP363-XC2

DSP363-XC2

Ethernet Module; 400MB/sec Digital Bus; Net-50 + ARM7; 225MHz 'C6713 DSP; Virtex II FPGA

Overview | Features | Benefits | Layout | Block Diagram

Overview

DSP363-XC2 is a 'Stand-alone' Module that combines a TMS320C6713 DSP, a Xilinx FPGA and a NetSilicon ARM-chip with integrated MAC controller for connection to an Ethernet network. Typical applications for this Module will be high-performance Radar systems, where the FPGA will do the I/O interfacing from/to the RF section; the DSP doing the FFT processing and the ARM-Core doing the data-manipulation and the control of the Ethernet/Internet connections

Key Features:

	Single width module
	Net-50 Ethernet Solution
	16Mbytes SDRAM for the ARM Net50 processor
	225MHz TMS320C6713 DSP
	16 Mbytes (optional 64Mbytes) SDRAM for the DSP.
	8 Mbytes Flash
	Dual-port Memory between the processors Xilinx Virtex II – XC2V1000-4 FPGA.
	Two 16-bit 200MB/sec Digital Bus Interfaces on a 400MB/sec Digital Bus connector
	Six ComPorts
	TIM Global Connector
	TIM standard compatible.
	12 months warranty

Benefits

	The DSP363-XC2 is the second generation of Hybrid-Modules that combines FPGA, Floating Point DSP, and an ARM7 Core with an integrated MAC controller for connection to a Ethernet network. The DSP363-XC2 provide a unique path for connecting high-speed DSPs to the Internet for applications like Radar applications, Spectrum Analysers, Digital Radio and similar Telecom systems.
	The DSP363-XC2 is supported by either NetSilicon Linux or the NetOS or DSP6060 to program the ARM sections of the Net50 processor. The DSP is controlled by either Code Composer Studio or 3L Diamond RTOS.

Layout for the DSP363-XC2 (PDF):

CLICK for Block Diagram (PDF):

Send questions and comments to webmaster.